Applications

Investigate the effect of surface roughness on a nm-scale on the performance of macroscopic optical components.

Surface roughness due to fabrication processes can significantly influence the performance of optical components. For a quantitative investigation of such effects, rigorous simulations of Maxwell's equations on the microscopic level have to be performed. Due to the outstanding convergence properties of higher-order finite elements and due to the nearly arbitrary resolution properties of unstructured spatial FEM meshes, such multi-scale simulations can be approached ideally using JCMsuite.

Fig. 1: Toy example of a microoptical component (size of the computational domain: 120 microns by 320 microns). A Gaussian beam is incident from the top and reflected by TIR.

Fig. 2: Detail of the triangular mesh with a surface roughness of 10nm. (Automatic mesh generation using JCMgeo.)

Figure 1 shows a sample problem: an optical element with a radius of curvature in the mm-range is illuminated by a gaussian beam from the top. We simulate the setup with a smooth surface and with a rough surface. Figure 2 shows a detail of the mesh including roughness (rms-value of few nm). Figure 3 and 4 show resulting near field intensity distributions with (Fig. 3) and without (Fig. 4) roughness. Clearly, the roughness has great impact on the field distribution. Through build-in post-processes, JCMsuite computes the relevant observable quantities (e.g. the angular spectrum of scattered light, or the energy flux to specified regions).

Field with surface roughness

Fig. 4: Intensity distribution without surface roughness.

 

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok